TeleMaster

REMOTE RECEIVER

Description:

A simple, economical telemetry system to turn one or more pumps on and off and transmit pumping status over a single pair of wires. The Telemaster is located at the remote pump site and provides an output contact to the pump starter. Typical model RC1-200-1 would include remote receiver for single pump with phone line arrester, plug in relays and built-in power supply.

Operation:

Functions range from starting and stopping a single pump to starting and stopping two pumps with a pump run report back for both pumps. Any Master Level Controller can be used as a transmitter which only requires a contact closure for transmission.

• A single pair of transmission wires, telephone or private, of 26 gauge or larger can be used
• A continuous pair is required from the transmitter switch to the remote pump site
• Loop resistance of up to 2000 ohms is permissible
• The built-in low voltage power supply is 36VDC and is protected with a 1/2-amp fuse
• 10 amp @ 120/240V output relay contact for pump starter